Fencing cost per metre: what does a rate per running metre cover?

Last updated

Fencing cost per metre, or per running metre, is the price of one metre of finished fence along the boundary. It covers the fabric, its share of the posts, braces and fittings, and the installation if it is included. Per running foot is the same divided by about 3.28. Multiply by your boundary for the total.

Work out the fence for your boundary

What are you fencing?

Did you know? A knotted fence needs around half the posts of chain link: its posts stand 5 to 6 m apart.

What must it keep out?

Did you know? For nilgai (blue bull) and cattle, a fence needs to be at least 6 ft high.

How big is the land, or how long is the boundary?

Give the land area in the unit you use, or the boundary length if you know it.

Its shape

Each gate has a braced post each side.

Did you know? A square acre is about 64 m a side and about 255 m around. One hectare, square, is 400 m around.

Where is the site?

The state sets the land units and the delivery. The PIN code helps us check the site, if you know it.

Six digits.

Did you know? Sites within 20 km of the coast, or chemically aggressive sites (C4 and above), need a site-specific recommendation.

Supply only, or supplied and installed?

Did you know? Correct installation is the main condition for a fence to reach its rated life.

Which fence are you thinking of?

Did you know? Conventional galvanised chain link lasts 2 to 5 years in Indian conditions, on 40 to 60 GSM of zinc.

Your result

Answer the questions, then press "Show my fence and its cost". Your result shows here.

Get your rates

Your name and mobile number: your rates show on this page, and our team sends a one-page summary on WhatsApp.

About you

We reply on WhatsApp or by phone.

Your request

Filled in from the tool: your answers and the counts, never a price.

How we use and protect your details: privacy notice.

What does a fence need per running metre?

A knotted fence needs a post every 5 metres and conventional galvanised chain link a post every 2.5 metres, with braced strain posts at the corners, every 10th post and each side of a gate. Over a whole boundary that becomes:

What a boundary needs, by its length: a closed boundary with four corners and no gate
BoundaryPosts, knotted fence (5 m)Posts, chain link (2.5 m)Pits, knotted fencePits, chain linkRolls (30 m)Price range
100 m204028484Work it out
250 m52100681249Work it out
500 m10020012424017Work it out
1,000 m20040024048034Work it out
5,000 m1,0002,0001,2002,400167Work it out

Counts for SIMO Securon Zeta Nova, a Q-Knot™ fixed knot fence 6 ft high, with a strain post at each corner and every 10th post. Every strain and corner post is braced, and each post and brace needs a pit.

The calculator gives the total range for your own boundary without your number; your rate per running metre, per running foot and per sq ft comes after your name and mobile number.

Fencing rate per running foot, per metre and per km

  • Per running foot: the rate per running metre divided by about 3.28.
  • Per kilometre: the rate per running metre times 1,000. The calculator gives a supplied and installed range for fences of 5 km or more.
  • What a quote per running metre should say: the fabric, its height and grade; the posts, braces and fittings; the toppings, such as RTHT™ high tensile barbed wire; the installation; the transport; and GST.
  • Jali (chain link) and tarbandi (wire fencing) rates are often for the mesh or wire alone. A knotted fence needs around half the posts of chain link and installs about 40 percent faster, so compare finished fence with finished fence.

More about fencing cost per metre

What sets the rate per running metre?

The fence (height, grade and toppings), the ground and how the posts are set, the corners and gates for the length, the service (supply only, or supplied and installed), and the size of the job. See fence installation cost for the site’s part.

How long is my boundary?

Measure it, or work it out from the area: a square acre is about 255 metres around. The fencing cost per acre page and the calculator turn an area in any unit into a boundary.

FAQ

Fencing cost per metre: questions

What is a running metre of fence?

One metre of finished fence measured along the boundary, whatever its height; quotes often write it as rmt or per meter. A rate per running metre should include the fabric and its share of the posts, braces and fittings; ask whether it includes the installation, the transport and GST.

How do I turn a rate per running metre into a rate per running foot?

Divide it by about 3.28, the feet in a metre. To go the other way, multiply a rate per running foot by 3.28. Per kilometre, multiply the rate per running metre by 1,000.

Why is the rate per metre lower on a longer fence?

Because some costs come once per job: bringing the crew and the tools to site, setting out, and the corners and gates. Spread over a longer boundary, they add less to each metre.

What do jali and tarbandi mean?

Jali is chain link mesh, and tarbandi (taar bandi) is wire fencing. A jali rate per metre is often for the mesh alone; ask for the rate per running metre of finished fence, with posts and installation, to compare it with a knotted fence.

Want your rate per metre?

Send the boundary length, the height and your PIN code on WhatsApp, or call us. The SIMO Securon team sends the rate per running metre for your fence.