Fencing contractor for supply and installation, anywhere in India

SIMO Securon is a fencing contractor as well as the maker: its trained crews supply and install its fixed knot fence anywhere in India once an order is confirmed, to SIMO's own standards of foundations, bracing and tension. It can also train your own contractor on site, or take the whole job as turnkey EPC.

Fence installer or fencing contractor: what does SIMO Securon do?

SIMO Securon makes the fence and installs it. Once your order is confirmed, it arranges a trained installation crew for your site, anywhere in India, and installs to SIMO’s own standards. One contract covers the material and the work, so one company answers for the whole fence.

The standards the crews work to

Installation anywhere in India, from NagpurA diagram, not a map: SIMO Securon's head office and works in Nagpur at the centre, offices in Ahmedabad, Pune and Mumbai (by appointment only), and lines reaching every region of India, where installation crews are arranged after an order is confirmed.NORTHNORTH-EASTEASTSOUTHWESTAhmedabadMumbaiPuneNagpur
Nagpur, head office and works; offices in Ahmedabad, Pune and Mumbai, by appointment only; installation crews arranged for your site after order confirmation, anywhere in India.

How does an installation run, and how does a site visit work?

  1. EnquiryCall, WhatsApp or send the form: site, location, boundary length and what the fence must keep out
  2. Site details or a surveyYour drawings and photographs, or a visit to walk the boundary, ground, access and gates
  3. QuotationGrade, height, posts, toppings and installation, for your site
  4. OrderYou confirm the order and the programme
  5. Crew and material scheduledA trained installation crew and the material arranged for your site
  6. Installation to SIMO standardsFoundations, bracing, tensioning and fixing, as the installation guide sets out
  7. Inspection and handoverChecked along the line, with care guidance

Which service level suits your site?

Three levels of serviceThree levels of service appear: supply only, supply and install, and turnkey EPC. The six EPC steps then follow in order: site survey, engineering design, supply, installation, inspection and handover.1Supply onlyYour contractor installs;we can train the team2Supply and installOur crews install.One point of responsibility3Turnkey EPCFrom site surveyto handoverSupply and install is what we recommend to most customersTURNKEY EPC IN SIX STEPSSite surveySTEP 1Engineering designSTEP 2SupplySTEP 3InstallationSTEP 4InspectionSTEP 5HandoverSTEP 6About 7 days for standard rolls and 30 to 45 days for custom projects, from order confirmation.

Most sites choose supply and install: one contract, one point of responsibility. Compare the three ways to work with us

More about our fencing contractor service

What does the installation crew do on site?

The crew sets out the line, digs and concretes the foundations, braces every terminal, corner and gate post, waits for the concrete to cure, runs out and joins the fabric, tensions every line wire, fixes it to every post and mounts any toppings.

That matters because a high tensile knotted fence is a system: how long it lasts depends on the posts, bracing, joining and tension as much as on the wire. Correct installation is the main condition for a fence to reach its rated life. The standards the crews work to are in the fixed knot fence installation guide.

What does each service level include?
  • Supply only: the fence with matched QvikFixrr™ posts and fittings. Your contractor installs, and SIMO Securon can send a trainer to work alongside the team. Suits buyers with a trusted contractor, or tenders that let installation separately.
  • Supply and install (recommended): SIMO Securon supplies everything and its trained crews install it. One contract, one point of responsibility. Suits most sites, from farms and plots to factories.
  • Turnkey EPC: site survey, engineering design to agreed drawings, full supply, installation, inspection, and handover with documentation. Suits solar, infrastructure and large industrial projects.
What happens before and on a site visit?

Before a site visit, send what you have: the site location and PIN code, the boundary length or a drawing, photographs of the ground, corners and gates, and what the fence must keep out (cattle, nilgai, wild boar or people). For many sites that is enough for a quotation. On a site visit, the team walks the boundary to check the ground, access for material, the corners and changes of direction, the gate positions, and whether the site is within 20 km of the coast or near chemicals, where a site-specific recommendation is needed.

Can SIMO Securon train your own contractor?

Yes. If you have a contractor you trust, choose supply only: SIMO Securon supplies the fence with matched posts and fittings, and an on-site trainer works alongside your contractor’s team on correct tensioning, bracing and fixing, backed by instructional videos they can go back to. Partners’ installation teams are trained the same way. See installation training, and give the team the installation guide and its manual.

Where does SIMO Securon install fences?

SIMO Securon installs anywhere in India. Once your order is confirmed, it arranges a trained installation crew for your site, so the whole country is one service area. Its offices are below; the three outside Nagpur are open by appointment only. The fence is made at the works in MIDC Butibori, Nagpur.

OfficeAddressPhone
Nagpur, registered office and head office504 Brij Bhumi, Plot 263/264, CA Road, Near Telephone Exchange Square, Nagpur, Maharashtra 440008, India+91 93730 08466
Nagpur, worksShed C, Plot No. 12, GSP Pyramid, Saigaon Road, MIDC Butibori, District Nagpur, Maharashtra 441122, India+91 93730 08466
AhmedabadB 1801, 18th floor, Westgate Building, near YMCA Club, SG Highway, Ahmedabad 380015 (by appointment only)+91 93562 02977
Pune404 San Mahu, 5 Bund Garden Road, Opp. Poona Club, Pune 411001 (by appointment only)+91 96655 44445
MumbaiVaswani Chambers, Dr Annie Besant Road, Worli, Mumbai 400025 (by appointment only)+91 95959 45550

Industrial and corporate fencing contractor

For factories, warehouses, data centres and corporate campuses, where the threat is a person climbing, SIMO Securon supplies and installs the ZS-Knot™ 4 x 2 inch anti-climb knotted fence, usually in Alpha and up to 8 ft, with RTHT™ barbed wire and concertina coil on the post attachments. For solar parks it installs the Q-Knot™ fixed knot fence over long perimeters, with around half the posts of conventional galvanised chain link. See industrial fencing and solar plant fencing, or send your RFQ with the drawings.

FAQ

Fencing contractor questions

Is there a fencing contractor near me?

SIMO Securon installs anywhere in India: once your order is confirmed, it arranges a trained installation crew for your site, wherever it is. Send your site PIN code on WhatsApp to +91 93730 08466 with the boundary length, and the team confirms the plan for your site.

Do you install the fence, or only supply it?

Both. SIMO Securon supplies only, with training for your contractor's team; supplies and installs with its own trained crews under one contract; or takes the whole job as turnkey EPC, from site survey and design to inspection and handover. It recommends supply and install to most customers.

How soon can installation start?

About 7 days for standard rolls and 30 to 45 days for custom projects, from order confirmation. The crew is scheduled with the material, and each order is confirmed individually. A knotted fence also installs about 40 percent faster than conventional galvanised chain link, because it needs around half the posts.

Do I need a site visit before ordering?

Not always. For a simple boundary, the boundary length or a drawing, a few photographs of the ground and gates, and the PIN code are often enough for a quotation. For a larger or more complex site, the team walks the boundary first: ground, access, corners, gates and what the fence must keep out.

Can you train our own fencing contractor?

Yes. With a supply-only order, SIMO Securon sends an on-site trainer to work alongside your contractor's team on tensioning, bracing and fixing, backed by instructional videos they can go back to.

Installation training

Do you work as an industrial or corporate fencing contractor?

Yes. For factories, warehouses, data centres and corporate campuses, SIMO Securon supplies and installs its ZS-Knot 4 x 2 inch anti-climb knotted fence, usually in Alpha, up to 8 ft, with RTHT barbed wire and concertina coil, or takes the perimeter as turnkey EPC.

Industrial fencing

Tell us about your boundary

Send the site location and PIN code, the boundary length or drawings, and what the fence must keep out. We confirm the design, quantities and installation, and arrange the crew once you order.