Fixed knot fence tools, posts and fittings: the QvikFixrr range
QvikFixrr is SIMO Securon's range of fixed knot fence tools, posts and fittings: GI angle posts, clips, fabric locks, concertina coil, made-to-order chain link and installation tools. A 6 ft SIMO Securon knotted fence stands on 50 x 50 x 6 mm intermediate and 65 x 65 x 6 mm terminal posts, 5 to 6 m apart.
ISO 9001, 14001 and 45001 certified (Royal Assessments)
Tested at NABL-accredited laboratories
Made in Nagpur since 2023
Installation anywhere in India
Build your order
The QvikFixrr range
Posts, fittings, toppings, chain link and tools, matched to SIMO Securon fabric. Pick quantities, add them to your enquiry list and send it; we reply with prices and delivery.
Work out posts for your boundaryAn intermediate post every 5 m; a strain post at every corner, every 10th post and each side of a gate.
Posts
QvikFixrr intermediate posts
GI angle, ISA 50 x 50 x 6 mm, standard 8.5 ft shaft with attachments for barbed wire and concertina coil. GI (80 micron hot-dip galvanised) or epoxy coated.
posts
Posts
QvikFixrr strain, corner and gate posts
GI angle, ISA 65 x 65 x 6 mm, standard 8.5 ft shaft, braced with a 45 degree strut and a horizontal stay. GI or epoxy coated.
posts
Posts
Custom posts for 8 ft fences
Made to the design for fence supply orders of 2 km running length and above.
posts
Fittings
QvikFixrr V-Clips and C-Clips
Industrial grade, Zn-Al coated to match the life of the fence. For fixing the fabric to the posts.
m of fence
Fittings
Fabric locks and M10 fasteners
Flat bar fabric locks and M10 hot-dip galvanised fasteners, used at every strain, terminal and corner post.
strain posts
Toppings
RTHT™ barbed wire
Reverse-twisted high tensile barbed wire, 15.5 x 15.5 SWG, 800 MPa wire, Zeta Nova grade Zn-Al coating (120 GSM), rated for 15 years or more, in 200 m bundles of 12 to 13 kg. Runs on the post attachments.
m
Toppings
QvikFixrr concertina coil
Security topping seated in the post attachments above the fabric. Diameters from 450 to 1,000 mm, on a 2.5 mm high-tensile core wire with a galvanised blade.
m
Tools
Installation tool set
A fence puller, a tensioner and a wire twister. Free, one set per project, with fence supply orders of 2 km and above (terms and conditions apply).
sets
Tools
Wire grip joiners
For joining and tensioning line wires.
pieces
Chain link
QvikFixrr chain link
Made to order: to IS 2721 (galvanised), or in Zeta Nova grade zinc-aluminium coating.
m
Quantities are for planning. We confirm the design and quantities with you before any order. No prices are shown or charged online: send the list and we reply on WhatsApp.
How do QvikFixrr posts and fittings make a complete fence?
A knotted fence is only as strong as its weakest connection, so SIMO Securon supplies the posts, fittings, toppings and tools with the fabric as one matched system.
A fence bay builds up in order: a QvikFixrr terminal post, 65 x 65 x 6 mm; an intermediate post, 50 x 50 x 6 mm; a strut at 45 degrees; the fence fabric; QvikFixrr clips and fabric locks; RTHT barbed wire; and concertina coil on the post attachments.
5 to 6 mbetween posts on an Alpha knotted fence, around half the posts of chain link
50 x 50 x 6 mmGI angle intermediate posts (ISA)
65 x 65 x 6 mmGI angle terminal and corner posts (ISA), braced
8.5 ft standard, with attachments for barbed wire and concertina coil; suits a 6 ft fence with about 0.76 m in the foundation
Post spacing
5 to 6 m for Alpha; 5 m for Zeta Nova and Pi
Post coating
Hot-dip galvanised (80 micron) or epoxy coated
Clips
V-Clips and C-Clips, industrial grade, Zn-Al coated
Fabric locks and fasteners
Flat bar fabric locks and M10 hot-dip galvanised fasteners, at all strain, terminal and corner posts
Concertina coil
Diameters 450 to 1,000 mm; 2.5 mm high-tensile core wire; galvanised blade 0.4 to 0.6 mm thick, in short, medium and long profiles
Chain link
Made to order: to IS 2721 (galvanised), or in Zeta Nova grade Zn-Al coating
Installation tools
Fence puller, tensioner and wire twister; wire grip joiners for joining and tensioning line wires
Custom posts
8 ft fences and other designs, for fence supply orders of 2 km running length and above
More about QvikFixrr posts, fittings and tools
Why buy fence posts and fittings with the fence?
A knotted fence is only as strong as its weakest connection. Premium fabric fixed with weak clips onto rusting posts will fail, and the fence gets the blame. Correct posts and installation are conditions of the fence’s rated life, so SIMO Securon supplies the matched system and quotes it with every fence: one supplier answers for the whole perimeter.
The same range serves owners fencing their own farm or plot (see farm fencing), contractors installing a supply-only order, and dealers selling a complete fence.
What makes up a complete knotted fence?
A complete knotted fence has five parts: the fence fabric, the posts, the fittings that fix one to the other, a topping where people are the threat, and the tools to tension it.
ZS-Knot™ fence fabric (4 x 2 inch anti-climb grid, Alpha or Zeta Nova)
QvikFixrr posts: standard 8.5 ft shafts with attachments; terminal and corner posts braced
A typical ZS-Knot bay on the 4 x 2 inch anti-climb grid, with the complete system around it. Illustrative, not for construction.CAD-style blueprint of a typical 6 ft ZS-Knot 4 x 2 anti-climb fence bay: QvikFixrr angle posts on 8.5 ft shafts with a braced terminal post, concrete foundations, clips and fabric locks, RTHT barbed wire and concertina coil on the post attachments, inline tensioners, a 5 to 6 m post gap, and an enlarged detail of the anti-climb grid. Numbered callouts 1 to 6.Open the drawing full size: The complete SIMO Securon system: a typical ZS-Knot anti-climb bay
Posts: QvikFixrr GI angle posts, intermediate, terminal and corner, on 8.5 ft shafts with attachments for a topping.
Fittings: V-Clips and C-Clips, flat bar fabric locks and M10 hot-dip galvanised fasteners.
Toppings:RTHT barbed wire and QvikFixrr concertina coil, where people are the threat.
Tools: a fence puller, a tensioner, a wire twister and wire grip joiners.
Not sure how many posts and clips you need? The fencing cost estimator works them out from your boundary, and the order list near the top of this page takes QvikFixrr items on their own.
How far apart and how deep should fence posts be?
Posts (poles) on a SIMO Securon knotted fence stand 5 to 6 m apart for Alpha and 5 m apart for Zeta Nova and Pi, and go at least 50 cm into the ground: the standard 8.5 ft QvikFixrr shaft on a 6 ft fence leaves about 76 cm below ground. Terminal and corner posts are braced and set in concrete.
Post
QvikFixrr size
Where it goes
In the ground and bracing
Intermediate post
GI angle, ISA 50 x 50 x 6 mm
Every 5 to 6 m (Alpha) or 5 m (Zeta Nova, Pi) along the run
At least 50 cm, so the post is the fence height plus 50 cm or more: about 76 cm on the 8.5 ft shaft at 6 ft. Foundation about 75 cm deep on average; its size and depth depend on the soil and fence height, so adjust them to the site or follow the drawing agreed for the job
Terminal post
GI angle, ISA 65 x 65 x 6 mm
At the start and end of every run
A diagonal strut at 45 degrees and a horizontal stay to the first supporting post; concrete foundation at least 45 x 45 cm and 75 cm deep
Corner post
GI angle, ISA 65 x 65 x 6 mm
At every change of direction
Braced in both directions; concrete foundation 60 x 60 cm and 75 cm deep
Because a knotted fence carries its own tension, it needs around half the posts of conventional galvanised chain link. Posts on a straight run, both end posts included:
Straight run
Knotted fence, posts at 5 m
Knotted fence, posts at 6 m
Conventional chain link, posts at 2.5 m
Conventional chain link, posts at 3 m
30 m
7
6
13
11
50 m
11
10
21
18
1 km
201
168
401
335
To fit the fabric, tension it only once the concrete has fully cured, with wire tensioners at the terminal posts, tension wire grips on the line wires, and clips or staples on the stays. Add gravel or crushed stone at the base of a posthole where the ground needs it. Join rolls on a long run by splicing and twisting the line wires together, never by welding. For most sites SIMO Securon recommends supply and install by its trained crews; see fencing supply and installation services.
What is in each part of the QvikFixrr range?
QvikFixrr is the single SIMO Securon brand for everything around the fence fabric: posts, clips, fabric locks and fasteners, concertina coil, chain link and installation tools.
Cross-section of an L-shaped steel angle post.PostsGI angle: ISA 50 x 50 x 6 mm intermediate and ISA 65 x 65 x 6 mm terminal and corner posts, on a standard 8.5 ft shaft with attachments for barbed wire and concertina coil. Hot-dip galvanised (80 micron) or epoxy coated. The 8.5 ft shaft suits a 6 ft fence: 6 ft above ground and about 0.76 m in the foundation.
Clips, fabric locks and fastenersV-Clips and C-Clips fix the fabric to the posts: industrial grade, Zn-Al coated to match the life of the fence. Flat bar fabric locks and M10 hot-dip galvanised fasteners at every strain, terminal and corner post.
ToppingsQvikFixrr concertina coil in the post attachments above the fabric, and alongside it RTHT high tensile barbed wire, 15.5 x 15.5 SWG, in Zeta Nova grade Zn-Al coating. Add a topping where the threat is people.
Chain linkMade to order, to IS 2721 or in Zeta Nova grade Zn-Al coating. The right choice for temporary or low-cost boundaries.
Installation toolsA fence puller, a tensioner and a wire twister, with wire grip joiners for joining and tensioning line wires. Fence supply orders of 2 km running length and above get one set of the three tools free, per project. Terms and conditions apply.
What sizes does concertina coil come in?
QvikFixrr concertina coil (razor wire) comes in every diameter from 450 mm to 1,000 mm, with a 2.5 mm high-tensile core wire and a galvanised blade 0.4 to 0.6 mm thick, in short, medium and long blade profiles; other profiles are available on request.
It sits in the attachments of QvikFixrr posts above the fence fabric, on its own or with RTHT barbed wire, where the threat is people: factories, warehouses, data centres and other high-security sites. See industrial security fencing.
Can SIMO Securon supply chain link to IS 2721?
Yes. QvikFixrr chain link (jali) is made to order: to IS 2721, the Indian Standard for galvanised chain link fence fabric, or in Zeta Nova grade zinc-aluminium (Zn-Al) coating. Send your RFQ with the mesh size, wire gauge, height and length you need, or the tender specification.
Chain link costs less upfront and suits temporary or low-cost boundaries, and tenders that specify it; for a long rated life, choose a knotted fence. Knotted fence vs chain link compares the two.
What does SIMO Securon make for orders of 2 km and above?
On fence supply orders of 2 km running length and above, SIMO Securon makes 8 ft posts, special foundations, security accessories and other designs to suit the site, and includes one installation tool set free per project. Terms and conditions apply.
Buying for a dealership or a contract?
Dealers: SIMO Securon appoints authorised dealers and distributors, who receive attractive partner pricing, marketing support and installation training. See becoming a SIMO Securon dealer.
Contractors: with a supply-only order, SIMO Securon can send a trainer to work alongside your team on tensioning, bracing and fixing, with instructional videos to return to. See supply only with training.
Send us your RFQ
Send us your RFQ
For a complete fence, tell us the boundary length, the fence height and anything special about the site, and we will send a bill of quantities for fabric, posts, fittings and toppings. For chain link, give the mesh size, wire gauge, height and length you need.
Thank you. We have your request.
Your reference:
What happens next
We call or WhatsApp you, usually with a question or two about the site.
We suggest the grade, height and design, and send the price.
If you want us to install, we arrange a site visit.
What size angle iron fence posts does a 6 ft knotted fence need?
SIMO Securon uses QvikFixrr GI angle posts of ISA 50 x 50 x 6 mm for intermediate posts and ISA 65 x 65 x 6 mm for terminal and corner posts, on a standard 8.5 ft shaft. That leaves 6 ft above ground and about 76 cm in the foundation. An 8 ft fence needs custom posts, made for fence supply orders of 2 km running length and above.
Can I use cement or RCC posts instead of angle posts?
Yes, if they meet the standard. SIMO Securon's installation requirements allow concrete columns of at least 150 x 150 mm in high grade concrete, as well as steel angle posts of at least 50 x 50 x 6 mm on regular spans and 65 x 65 x 6 mm at terminals. QvikFixrr posts are GI angle posts. For highway, railway and utility corridors, where steel posts are stolen for scrap, the pilferage-free design uses RCC posts and FRP angles to the required specification and applicable standards.
They are made to: SIMO Securon supplies QvikFixrr V-Clips and C-Clips in industrial grade, Zn-Al coated to match the life of the fence. Posts come hot-dip galvanised (80 micron) or epoxy coated, and every post in contact with the fabric must stay free of rust, so walk the line after storms and replace a rusted post early.
What tools do I need to install a fixed knot fence?
A fence puller (sometimes called a fence stretcher), a tensioner, a wire twister and wire grip joiners. Fence supply orders of 2 km running length and above come with one set of installation tools free, per project: a fence puller, a tensioner and a wire twister. Wire grip joiners are not part of the free set. Terms and conditions apply.
What is the price of fencing poles?
SIMO Securon prices QvikFixrr posts with the fence, by the number you need, their section and finish. The count matters most: with posts every 5 metres, a straight kilometre takes 201 posts, against 401 for conventional galvanised chain link at 2.5 metres. Send your boundary length, corners and gates on WhatsApp to +91 93730 08466 for your price.
Tell us the boundary length, the height and the number of corners and gates. We will send a bill of quantities for fabric, posts, fittings and toppings.
